廢氣洗滌塔應用原理
廢氣洗滌塔應用原理
Application principle of tail gas absorption tower
廢氣洗滌塔應用原理
Application principle of tail gas absorption tower
利用氣體混合物在液體吸收劑中溶解度的不同，使易溶的組分溶于吸收劑中，并與其他組分分離的過程稱為吸收。操作時，從塔***噴淋的液體吸收劑與由塔底上升的氣體混合物在塔中各層填料或塔盤上密切接觸，以便進行吸收。伴有化學反應的吸收叫化學吸收。按吸收時氣液作用方式吸收塔可分為表面式、膜式、噴淋式和鼓泡式等。
Absorption is the process of making the soluble components dissolve in the absorbent by using the different solubility of the gas mixture in the liquid absorbent and separating them from other components. During operation, the liquid absorbent sprayed from the top of the tower and the gas mixture rising from the bottom of the tower are in close contact with each layer of packing or tray in the tower for absorption. Absorption with chemical reaction is called chemical absorption. The absorption tower can be divided into surface type, membrane type, spray type and bubble type according to the gas-liquid interaction mode during absorption.
Working principle, composition and application scope of acid mist purification tower
塔內氣液兩相的流動方式可以逆流也可并流。通常采用逆流操作，凈化塔以塔***加入自上而下流動，與從下向上流動的氣體接觸，吸收了吸收質的液體從塔底排出，凈化后的氣體從塔***排出。
The flow pattern of gas-liquid two-phase in the tower can be reverse flow or parallel flow. Generally, countercurrent operation is adopted. The purification tower adds top-down flow to contact with the gas flowing from bottom to top, and the liquid absorbing the absorbing substance is discharged from the bottom of the tower, and the purified gas is discharged from the top of the tower.
廢氣洗滌塔基本要求
Basic requirements for tail gas absorption tower
酸霧凈化塔具有哪些顯著的***點
What are the remarkable characteristics of acid mist purification tower
1．酸霧凈化塔內氣體與液體應有足夠的接觸面積和接觸時間。
1. The gas and liquid in the acid mist purification tower shall have sufficient contact area and contact time.
2．氣液兩相應具有強烈擾動，減少傳質阻力，提高吸收效率。
2. Gas and liquid have strong disturbance, which can reduce mass transfer resistance and improve absorption efficiency.
3．操作范圍寬，運行穩定。
3. Wide operation range and stable operation.
4．設備阻力小，能耗低。
4. Low resistance and energy consumption.
5．具有足夠的機械強度和耐腐蝕能力。
5. Have enough mechanical strength and corrosion resistance.
6．結構簡單、便于制造和檢修。
6. Simple structure, easy to manufacture and repair.
